clickpath
Information for GSA customers.
7:30 a.m. to 6 p.m. CST
Monday through Friday
Shopping Cart
Home > Browse by Specialty > Hospital > Medical Infusion Pumps > Used Infusion Pumps > Refurbished Deltec CADD-PCA (5800) Ambulatory Pump

Refurbished Deltec CADD-PCA (5800) Ambulatory Pump

Refurbished Deltec CADD-PCA (5800) Ambulatory Pump
$900.00

Call
for personal service.

SMITHS-RF-CADD-PCAQty: 
The Deltec CADD-PCA pump provides measured drug therapy to patients in hospital or outpatient settings. This ambulatory pump is indicated for intravenous, subcutaneous, epidural space or subarachnoid space infusion.

Administration of analgesics to the epidural space is limited to use with indwelling catheters specifically indicated for short-term or long-term drug delivery. Administration of analgesics to the subarachnoid space and administration of anesthetics to the epidural space are limited to use with indwelling catheters specifically indicated for short-term drug delivery.
  • Size: 1.1Ó x 3.5Ó x 6.4Ó
  • Weight: 15 oz., including battery and empty 50 ml cassette reservoir
  • Power Sources: 9V alkaline or lithium battery
  • Bolus Volume at Occlusion Alarm Pressure: <0.25 ml
  • Pump Timing Accuracy: +/- 0.1%
  • System Delivery Accuracy: +/- 6% (nominal)
  • Continuous Rate: 0 Ð 20 ml/hr or 0 Ð 99.5 mg/hr, depending on the concentration
  • Patient-Activated Dose Intervals: 5 min Ð 999 min in 1-min increments
  • Patient-Activated Doses per Hour: 0 Ð 12 over the last 60-min period
  • Accumulated Delivery: 0 Ð 999 mg or ml, rounded down according to the concentration setting of the device
  • Number of Patient-Activated Doses Delivered: 0 Ð 999
  • Number of Patient-Activated Doses Attempted: 0 - 999
  • RES VOL Range: 1 Ð 999 ml rounded up to the nearest ml in 1 ml increments; 000 = Off
  • GIVEN Range: 0 Ð 999 mg or ml
  • Clinician-Activated Bolus: 0 Ð 20 ml or 0 Ð 99.5 mg, depending on the concentration
  • Patient-Activated Dose: 0 Ð 6 ml or 0 Ð 99.0 mg, depending on the concentration
  • Alarms: Low battery, Battery depleted, Pump in Stop mode, Controller, microprocessor, or motor fault, Improper delivery, Power-up fault, Low residual volume, RES VOL = 000, High pressure delivery (28 +/- 12 psi)
 
P2756