The Baxter Flo-Gard 6201 volumetric infusion pump is the industry standard in standard set infusion pump technology. It can deliver a wide variety of fluids over a broad range of infusion rates.
- Flow Check Occlusion Alarm offers an in-line resistance display of incremental back pressure.
- Slide Clamp option offers an additional step to protect against inadvertent gravity free flow.
- Flow Rate Calculation is automatic after volume and time are selected.
- Front Panel Lock-out protects against tampering.
- Programmed Delivery Profile allows up to 10 steps, individualizing control of infusion ramping and tapering.
- Incremental Flow Rate can deliver 1-99.9 mL/hr in increments of 0.1 mL/hr.
- Automatic Restart once occlusion clears.
- Automatic Piggybacking of secondary medications.
- Uses Baxter standard IV administration sets that eliminates the need for costly disposable sets and reduces the potential for waste.
- Dimensions: 8" wide x 5.1" deep x 11.4" high (20cm x 13cm x 29 cm)
- Weight: 11.6 pounds (5.3kg)
- Battery: 12v, 2.0 amp, sealed lead acid
- Battery Recharge: 80 percent charged within 8 hours
- Battery Life: 6 hours at l,400 mL/hr
- Power Cord: Biomed replaceable, 9' (2.9m)
- Leakage Current: less than 50 microamps (per UL544)
- Fuse: 1/2 amp, 250v slow-blow
- Communications Port: R5232 serial port
- Operating Environment: 15.5 – 40.6 degrees C (60-105 degrees F)
- Power Requirements: ll5 VAC, 60Hz, 30W
Shopping Cart